service hotline
+86-18366626366
Normal inlet temperature Air-cooling compressed Air Dryer
Normal inlet temperature Air-cooling compressed Air Dryer
Product name: Air-cooled refrigerated air dryer
Product model: SLAD-6NF
Product Function
● Dry, quality air is vital for long-term, trouble-free operation of your processes. SHANLI SLAD series dryers protect your products and systems against damage or corrosion.
● They remove moisture from compressed air with a dew point as low as 2-10 °C/35.6-50 °F. Easy to install, simple to operate and reliable, they provide the dry air you need, allowing you to concentrate on your core business.
Technical Specifications
●Technical Specification:
●Air Capacity:30-18000 m3/h/0.5-300m3/min
●Pressure: 0.6-1.6 MPa
●Inlet temperature: 15-60C
●Ambient temp: 5-50C
●Cooling Type: air-cooled type
●Power: 220V/380V/50Hz or 60Hz
●Refrigerant: R22/R134a /R407C
*Rated condition:
●Air inlet pressure 0.7MPa,
●Air Inlet temp 38C
●Ambient temp 38C
●PDP 2-10C
●OEM and ODM service is available.
●Compressor:Hitachi or Bitzer
●Hot gas by pass valve:Danfoss
●Automatic expansion valve:Danfoss
●Heat Exchanger:Aluminum plate fin type
●Auto Drain:Electric Drainer
●Note: Refrigerator air dryer without metal box board for over 80 m3/ min.
●Other special standards can be customized.
Working Principle
Refrigeration compressed air dryer makes the water vapor in the compressed air condenses into droplets through cooling so as to achieve the purpose of reducing moisture content. Condensed droplets are discharged by the automatic drainage system.
Annotation:
| 1. Cooling medium compressor | 6. Manual valve | 11. Hot gas by-pass valve |
|---|---|---|
| 2. Air condenser | 7. Cooling medium sight glass | 12. Water volume adjustable valve |
| 3. Water condenser | 8. Expansion valve | 13. Pre-cooling gas |
| 4. Magnetic valve | 9. Automatic drainer | 14. Evaporator |
| 5. Drying filter | 10. Gas water separator | 15. Effective separator |
Performance Parameters
| Refrigerated Compressed Air Dryer | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Model | Flow Capacity (Nm3/min) | Voltage (V) | Fan Power (W) | Pipe Diameter | Air Inlet Pressure (Mpa) | Net Weight (Kg) | Length (mm) | Width (mm) | Height (mm) | Air Flow (N3/h) |
| SLAD-0.5NF | 0.65 | 220 | 1x67 | G1/2" | 0.6-1.0 MPa | 45 | 750 | 430 | 610 | 760 |
| SLAD-1NF | 1.2 | 220 | 1x67 | G1" | 70 | 780 | 450 | 610 | 760 | |
| SLAD-2NF | 2.5 | 220 | 1x95 | G1" | 110 | 800 | 460 | 720 | 1580 | |
| SLAD-3NF | 3.6 | 220 | 1x150 | G1" | 130 | 950 | 480 | 720 | 3150 | |
| SLAD-4.5NF | 5 | 220 | 1x240 | G1 1/2" | 150 | 1170 | 540 | 750 | 5580 | |
| SLAD-6NF | 6.8 | 220 | 2x150 | G1 1/2" | 160 | 1350 | 520 | 753 | 6300 | |
| SLAD-8NF | 8.5 | 220 | 2x195 | G2" | 200 | 1100 | 670 | 1098 | 8470 | |
| SLAD-10NF | 10.9 | 380 | 2x195 | G2" | 250 | 1200 | 670 | 1098 | 8470 | |
| SLAD-12NF | 12.8 | 380 | 2x195 | G2" | 300 | 1200 | 670 | 1048 | 8470 | |
| SLAD-15NF | 16 | 380 | 2x190 | DN65 | 320 | 1460 | 750 | 1630 | 8470 | |
| SLAD-20NF | 22 | 380 | 2x240 | DN65 | 420 | 1670 | 800 | 1663 | 11160 | |
| SLAD-25NF | 26.8 | 380 | 2x240 | DN80 | 550 | 1820 | 800 | 1713 | 11160 | |
| SLAD-30NF | 32 | 380 | 2x380 | DN80 | 650 | 1900 | 860 | 1875 | 15240 | |
| SLAD-40NF | 43.5 | 380 | 3x240 | DN100 | 2200 | 2200 | 930 | 1941 | 16740 | |
| SLAD-50NF | 53 | 380 | 3x380 | DN100 | 2450 | 2450 | 900 | 2110 | 22860 | |
| SLAD-60NF | 67 | 380 | 4x380 | DN125 | 2140 | 2140 | 1450 | 1787 | 30480 | |
| SLAD-80NF | 90 | 380 | 4x550 | DN125 | 2070 | 2070 | 1600 | 2029 | 42400 |
1.The inlet and outlet temperature difference of pre-cooler is 3 C, which is much more better than the similar products and minimize the outlet relative humidity and avoid condensation in the pipings.
2.Outlet compressed air relative humidity is low, the below air pipe surface without Condensation phenomenon.
The pre-coolerreclaim nearly 90% compressed air, and greatly reduces the evaporator load, so the power consumption of the refrigerant compressor is low, only 70% of the normal one.
3.Friendly refrigerant is adopted for all series dryers.
Security and Reliability
Multiple overload protection.
Newest CE certificate.
Company Profile
Established in 1997, Hangzhou Shanli Purify Equipment Corporation is an enterprise specialized in design, development
and production of compressed air dryers, filters and other purification equipments. Our company has a workshop of
30, 000 square meters and more than 300 staff. Shanli has become one of the largest refrigerated air dryer manufacturers
in the Chinese purification industry with the top sales turnover. Our self-design and self-made equipment is compatible with many
famous brands of air compressor to efficiently remove water, oil and dustfrom compressed air. On basis of IS0 9001
certification standard, our design, production, test and services of the machine are all well managed and strictly
controlled since year 2001.
Customers & Suppliers
OEM service for Boge and supporting supplier for Atlas,Compair,Ingersoll Rand,Airman air dryer
,Hitachi air dryer,IHI air dryer,Donaldson air dryer
Package
Contacts
Hangzhou Shanli
Add: No.8,Liangzhan Road, Renhe Street,Hangzhou, 311107, China
Tel:86-571-86392999
Fax:86-571-86392998
- Tel
- *Title
- *Content
Sign up for our newsletter to stay up-to-date with our promotions, discounts, sales, and special offers.
