solutions to your scaffolding needs
service hotline
+86-18366626366
air compressor
SHANLI is a Professional China Manufacturer and Supplier of air compressor, We Provide Custom Wholeslae air compressor factory, Private Label air compressor and air compressor Contract Manufacturing, Contact us now to get the best quotation for air compressor, We will respond in a timely manner, we are not the lowest price of air compressor, but we will provide you with better service.
663 products found
Watt-hour meter is standard to display and record the dryer power consumption, you will know the running cost of the dryer.
Ensure the outlet air quality is good and provide the savings by the energy management system.
Install a dewpoint sensor to monitor the quality of outlet air of dryer and to control the dryer flexible cycle time.
it has excellent heat it has excellent heat conduction.
Heater material is stainless steel or Incoloy. Maximum operating temperature is acceptable to 600~800℃
High closed efficiency to prevent the water vapor contamination from leakage.
Use double eccentric butterfly valve and the position switch to ensure the valve position is correct.
it avoided the dewpoint soike due to moisture penetration as two vessels were switchover.
Use a few CDA to cool the desiccant to avoid the contamination of water vapor and no adsorption in advance.
Procedure of adsorption and regeneration are in reverse direction to ensure there was no repeated adsorption.
This would be able to promote the adsorption efficiency as well as the dewpoint performance at outlet.
change the cycle via PLC controller to allow continuous operation
The function of dewpoint meter is to check the drying quality of the outlet air of dryer
One chamber is operational (drying), while the opposite chamber is regenerating.
Vessel is re-pressurized after the cooling process finished. Now the system is ready for a changeover.
adsorption process is assisted by triggering a blower which suck the ambient air through a heater to regenerate the desiccant.
Dryer contains with twin chambers each filled with desiccant material which dries the compressed air as it passes through.
Pressure Dewpoint -40℃ as standard or -20℃ options are also available.
The compressed air is completely separated providing lowest pressure loss, less desiccant consumption and extend lifetime.
filling is an experiment-proved operation provides best filling rate and distribution of desiccant and erases tunnel effect.
Operating with different type of desiccant makes minimum requirement of desiccant
Modular construction means less than half the size of traditional dryers.
dryers provide the ultimate in performance, security and reliability.
Using the modular design patented technology and used in conjunction to deliver air at -40℃ pressure dewpoint as standard.
The can provide the simple and cost effective solution for the provision of clean dry compressed air.
One chamber is operational (drying), while the opposite chamber is regenerating using the Pressure adsorption method of drying.
lean and dry compressed air takes operation costs down and provide your instruments to work efficient.
Liquid water is formed at every pressure and temperature changes.
E) Expansion valve F) Water separator G) Condenser H) Automatic drain I) Pressure control for compressor
Easy to install and maintain，Industrial Water-cooled Freeze Air Dryer for Pakistan
Sign up for our newsletter to stay up-to-date with our promotions, discounts, sales, and special offers.
subscription
navigation
Email: Click to contact me