solutions to your scaffolding needs
service hotline
+86-18366626366
air dryer
SHANLI is a Professional China Manufacturer and Supplier of air dryer, We Provide Custom Wholeslae air dryer factory, Private Label air dryer and air dryer Contract Manufacturing, Contact us now to get the best quotation for air dryer, We will respond in a timely manner, we are not the lowest price of air dryer, but we will provide you with better service.
1,271 products found
Later, as compressed air is discharged and cooled in an aftercooler, condensation begins to occur.
since there is a rise in temperature during actual compression, condensation generally is
avoided within the compressor
avoided within the compressor
Condensation in the compressed air system would occur at the inlet air saturation temperature
Pneumatic Equipment Water-cooled Combined Compressed Air Dryer
Combined air dryer with high quality and efficient heat exchanger and condenser
Lower Air consumption: 3%-5%,Famous air compressor combined compressor air dryer SDZF-25
Lower dew point: -40℃ for normal.-70℃ for special requirement
Timing can be adjusted, the service life of the drier than normal blot machine to extend more than three times.
Stable performance:stable outlet dew point,without any ice block and moisture.
Fully-enclosed refrigeration system with water-removing rate of 90%
High Humidity Alarm: Accurately monitors humidity levels of the compressed air
Dryers are designed for a Maximum Allowable Working Pressure of 1MPa and are provided in 380V-50HZ electrical configuration.
SHANLI heated desiccant dryers include an external heater to heat dry purge air for regeneration.
Moisture Load Control: Reduces purge air consumption by monitoring moisture loading in both towers.
Highly accurate monitoring of dryer dew point performance with an Aluminum Oxide-type
moisture sensor.
moisture sensor.
The use of oil free compressors can reduce the amount of contaminants in a compressed air system.
Before compressed air is used in production, it must be treated to remove moisture and contaminants.
Design features, materials of construction and dimensional data should not be relied upon unless confirmed in writing.
SHANLI reserves the right to incorporate our latest design and material changes without notice or obligation.
At the end of 2 minutes, valve (F) opens and Tower 1 depressurizes. The main air flow is now dried by TOWER 2 .
After a set time, the automatic solid state timer closes purge repressurize valve (D) allowing TOWER 2 to repressurize.
The air is exhausted through purge/repressurization valve (D) and exhaust muffler (E) to atmosphere.
This extremely dry, low pressure air flows through and regenerates the desiccant
in TOWER 2.
in TOWER 2.
Compressed air enters the dryer and is directed to TOWER 1 through valve (A) and exits the dryer through shuttle valve (B).
All dryer components are completely assembled, piped, and wired. (All filters and moisture indicator are field installed.)
Fully repressurizes the regenerating tower before going on-stream to prevent bed movement and loss of pressure downstream
Heavy duty purge exhaust muffler for quiet operation
Consistent outlet pressure dew points - desiccant beds and cycle time optimized to produce -40°F (-40°C) pressure dew points.
The Dryers incorporate a time proven design, with superior features and reliability, in a compact and easy to install package.
Desiccant Air Dryer will protect process and pneumatically operated equipment from the potentially harmful effects of moisture.
Sign up for our newsletter to stay up-to-date with our promotions, discounts, sales, and special offers.
subscription
navigation
Email: Click to contact me