solutions to your scaffolding needs
service hotline
+86-18366626366
compressed air can
SHANLI is a Professional China Manufacturer and Supplier of compressed air can, We Provide Custom Wholeslae compressed air can factory, Private Label compressed air can and compressed air can Contract Manufacturing, Contact us now to get the best quotation for compressed air can, We will respond in a timely manner, we are not the lowest price of compressed air can, but we will provide you with better service.
677 products found
Handling capacity: 42.7-425 Nm3 / min
Air inlet pressure: 0.7Mpa
Air inlet temperature: 38℃
Air inlet pressure: 0.7Mpa
Air inlet temperature: 38℃
Handling capacity: 42.7-425 Nm3 / min
Air inlet temperature: 38℃
Air inlet temperature: 38℃
Through the water cools, condenses and is discharged in the compressed air, it achieves the goal of drying. After the treatment
In the compressed air purified system, refrigerated compressed air dryer is the preferred equipment to remove water.
For a large majority of industrial applications a dew point of 40F is more than enough.
Pressure switches control the condenser's fan motor for saving energy and letting system always operate at desired conditions
State-of-the-art heat exchanger is the one of the highest cost saving one in the market
• The highly energy-efficient R134a refrigerant is a standard fort he whole models
Shanli provide whole range of products for filtration and air purification applications with a cost effective price.
Bad air will not just affect production process, it will also affect the production quality of final products.
The moisture or contamination in the air which will come from the standard compressor outlet will cause important system errors
Using clean and dry air is very important for all kind of air powered applications.
The flow of air is not affected by the amount of air being dried in the air dryer
the purge rating of an uncontrolled desiccant dryer is based on nameplate rating, not the amount of air flowing through it.
All of these dryers have filtration on the inlet to keep water and oil from damaging and contaminating the desiccant.
this level of dryness in not normally needed in general manufacturing unless the pipes are exposed to freezing temperatures.
a larger particle size (1/4” or more) is used as a buffer zone at the inlet
In some cases, more than one desiccant type can be used for special drying applications.
Desiccant types include silica gel, activated alumina, and molecular sieves.
allowing large quantities of water to be retained by a relatively small quantity of desiccant.
Regenerative desiccant type dryers use a porous desiccant that adsorbs the moisture by collecting it in its myriad pores
Dryers have a number of characteristics that can affect their cost of operation and the operating of the associated compressors
One type of dryer seen frequently across the world is the regenerative desiccant dryer.
Refrigerated air dryers are a cost effective means of providing air with pressure dew points of 37 to 50°F (3 to 10°C)
Patented, energy saving heat exchanger
Precooler/reheater exchanger
Low pressure drop
Digital controller
Precooler/reheater exchanger
Low pressure drop
Digital controller
Real energy-savings are the result of the right dryer and optimized dryer control system.
No-loss" electronic Eco-Drain for reliable condensate removal
Non-Cycling Refrigerated Air Dryer is extremely reliable. Non-Cycling dryers can be sized for any application,
The compressed air dryer is reheated in Air -to- Air Heat Exchanger and fed to the point of application.
No air-cooled aftercooler required for compressor.
Environmentally Friendly R-134a Refrigerant.
Environmentally Friendly R-134a Refrigerant.
Sign up for our newsletter to stay up-to-date with our promotions, discounts, sales, and special offers.
subscription
navigation
Email: Click to contact me