solutions to your scaffolding needs
service hotline
+86-18366626366
Air Dryer
1,250 products found
the purge rating of an uncontrolled desiccant dryer is based on nameplate rating, not the amount of air flowing through it.
All of these dryers have filtration on the inlet to keep water and oil from damaging and contaminating the desiccant.
this level of dryness in not normally needed in general manufacturing unless the pipes are exposed to freezing temperatures.
Where very low dew points are required, molecular sieve desiccant is added as the final drying agent.
a larger particle size (1/4” or more) is used as a buffer zone at the inlet
In some cases, more than one desiccant type can be used for special drying applications.
Desiccant types include silica gel, activated alumina, and molecular sieves.
allowing large quantities of water to be retained by a relatively small quantity of desiccant.
Regenerative desiccant type dryers use a porous desiccant that adsorbs the moisture by collecting it in its myriad pores
Dryers have a number of characteristics that can affect their cost of operation and the operating of the associated compressors
One type of dryer seen frequently across the world is the regenerative desiccant dryer.
The Compressed Air Challenge training material briefly covers a number of types of air dryers.
Refrigerated air dryers are a cost effective means of providing air with pressure dew points of 37 to 50°F (3 to 10°C)
Patented, energy saving heat exchanger
Precooler/reheater exchanger
Low pressure drop
Digital controller
Precooler/reheater exchanger
Low pressure drop
Digital controller
Real energy-savings are the result of the right dryer and optimized dryer control system.
No-loss" electronic Eco-Drain for reliable condensate removal
Low pressure drop filtered separator with microprocessor controlled filter monitor removes liquids and particulate to 3 microns
will always provide consistent dew points. Non-Cycling dryers also have very low maintenance costs.
Non-Cycling Refrigerated Air Dryer is extremely reliable. Non-Cycling dryers can be sized for any application,
These dryers will help save money by reducing power consumption while constantly providing consistent dew points.
A Cycling Refrigerated Dryer will increase or decrease refrigeration compressor load depending on the compressed air demands
The compressed air dryer is reheated in Air -to- Air Heat Exchanger and fed to the point of application.
zero loss condensate drains prevent waste of compressed air
EC Cooling fans use less energy than other units
EC Cooling fans use less energy than other units
R410: environmentally-friendly refrigerant gas
high-efficiency scroll refrigerant compressor
high-efficiency scroll refrigerant compressor
electronic regulation valves
advanced control with the Elektronikon Mk5
high-efficiency heat exchanger
advanced control with the Elektronikon Mk5
high-efficiency heat exchanger
The compatibility of the product is the responsibility of the person who designs the equipment or decides its specifications
Humid, hot air coming into the air dryer will be cooled down by a heat exchanger
Air flow capacity converted by the compressor intake condition [atmospheric pressure 32°C]
The power transformer marked with the voltage symbol “9” is integrated into the refrigerated air dryer.
pre-cooled by dehumified cool air. Then, it is cooled to the specified temperature
Sign up for our newsletter to stay up-to-date with our promotions, discounts, sales, and special offers.
subscription
navigation
Email: Click to contact me